30 m³ Hi-Blow Tank for Bulk Cement Transport PT SIS
Getting to Know the 30 m³ Hi-Blow Tank
A Hi-Blow Tank is designed to transport dry bulk materials using a pressurized-air system to assist with unloading. Unlike a dump truck, which typically unloads cargo by raising its body, a Hi-Blow Tank uses a blower and dedicated discharge lines to move material out of the tank. This approach is intended for materials such as cement that need to be transferred to a suitable receiving point.
The unit discussed here has a tank capacity of 30 cubic meters and is mounted on a Hino FL/FM 280 JW chassis. Its suitability for a particular operation should be assessed against the user's transport requirements, working conditions, and unloading setup.
Key Specifications


The following table summarizes the available specifications for this unit.
| Component | Specification |
|---|---|
| Vehicle type | Hi-Blow Tank |
| Tank capacity | 30 m³ |
| Chassis | Hino FL/FM 280 JW |
| Tank construction material | Steel |
| Tank shell thickness | 5 mm |
| Tank end thickness | 6 mm |
| Unloading system | Blower-assisted, pressurized-air discharge |
| Stated discharge rate | Up to 1,900 kg/min |
These specifications provide an initial reference when evaluating a Hi-Blow Tank for dry bulk material transport.
Steel Tank Construction
One notable detail is the tank's specified steel thickness. The shell is listed at 5 mm, while the tank ends are listed at 6 mm. These figures describe the unit's stated construction specifications. When selecting an industrial tank, material and thickness should be considered alongside capacity, cargo characteristics, and operating conditions. The objective is to evaluate the tank as a complete system rather than relying on capacity alone.
The Blower System: What Sets It Apart
The blower system is one of the defining features of a Hi-Blow Tank.
It uses pressurized air to help move dry bulk material through a dedicated discharge line. This makes the unloading process different from that of a conventional truck body that must be raised to release its load.
For cement transport, the system is designed to transfer material to a suitable receiving point. The unloading arrangement should be evaluated against the receiving facility, material characteristics, and operating procedures.
A Stated Discharge Rate of Up to 1,900 kg per Minute
The unit's specifications list a discharge rate of up to 1,900 kilograms per minute. This figure can be one reference point when assessing material transfer requirements. However, the stated discharge rate does not necessarily represent the total unloading time. Material properties, system configuration, transfer distance, and receiving facilities can affect actual performance, For this reason, the discharge specification should be assessed in the context of the intended operation.
What to Consider Before Choosing a Hi-Blow Tank
Before selecting a unit, consider the following factors:
-
Tank capacity. Match the tank volume to transport requirements and distribution patterns.
-
Chassis compatibility. Review the base vehicle specifications against the tank configuration and operating needs.
-
Tank construction. Check the specified material and relevant tank thickness details.
-
Unloading system. Confirm that the blower system is suitable for the material and receiving facilities.
-
Operating requirements. Consider unloading targets, travel routes, and working conditions at the destination.
These factors provide a more complete basis for evaluating a Hi-Blow Tank than capacity alone.
Hi-Blow Tank Solutions for Industrial Operations. Every operation has different requirements. Choosing a Hi-Blow Tank therefore involves considering material type, tank capacity, chassis, unloading system, and intended operating conditions.
PT Sribaru Indah Sejahtera provides manufacturing services for industrial transport equipment that can be discussed according to project requirements. Businesses interested in a Hi-Blow Tank can share their material characteristics, target capacity, planned chassis, and unloading requirements as a starting point for a more focused discussion.
Looking for a Hi-Blow Tank for bulk cement or other dry bulk materials?
Discuss your required capacity, chassis, tank construction, and unloading system with PT Sribaru Indah Sejahtera.

